PA6 GF30 BK — a sustainable recycled compound
More recyclate, less CO2:
ENNEATECH makes it possible
The demand for recycled PA6 GF30 is increasing. This is ensured by the Closed Substance Cycle Waste Management Act, the End-of-Life Vehicle Ordinance and other EU directives. A clear objective: The use of recycled materials must increase. For customers from the automotive industry, electrical and electronics, construction and all other sectors, there are two key topics of importance: The PA6 GF30 must match the quality of virgin material and must be available in sufficient quantities in the long term.
With its many years of experience in recycling and compounding polyamides, ENNEATECH fulfils precisely these requirements with the recycled PA6 GF30 from the ENTRON eco product range. ENNEATECH thus provides its customers with a high-quality recycled PA6 GF30 that enables them to manufacture more sustainable products with a product carbon footprint (PCF) that is up to 90% lower — without compromising on quality.
Switch to recycled PA 6 and PA 6.6 now!
A look at the properties
Recycled PA6 GF30
(trade name ENTRON eco B GF30 BK)
- Charpy impact strength: 72 kJ/m2
- Charpy impact strength: 12 kJ/m2
- Tensile modulus of elasticity: 9000 MPa
- Tensile strength: 170 MPa
- Elongation at break: 4 %
Melting temperature: 220°C — 230°C
- 30% glass fiber
- Black
- Drying: 80 °C; >4h
- Processing temperature: 240–270°C; <10 min
- Tool temperature: 60–90 °C
- Available as: impact-modified, UV-stabilised, heat-stabilised, injection moulding-optimised
- Packaging: silo, octabin, big bag, 25 kg bags
Frequently asked questions (FAQ)
- Environmental management according to ISO 9001
- Environmental management according to ISO 14001
- Energy management according to ISO 50001
- Environmental product declaration with product-related CO2 emissions using two methods: Environmental Product Declaration (EPD) and the Product Carbon Footprint (PCF)
- Acceptance test certificate for each delivery according to EP APZ 3.1 acc. DIN EN 10204
