PA66 GF50
A sustainable metal substitute containing 50% glass fiber
Low-carbon, high-performance matrix for extreme mechanical loads
As a high-performance material, the recycled polyamide ENTRON eco A PA66 GF50 NC represents the absolute pinnacle in the field of sustainable metal replacement.
With a maximum glass fiber content of 50%, this uncoated natural compound achieves an extremely high modulus of elasticity and outstanding dimensional stability under continuous mechanical stress. Design engineers specifically use this variant to directly replace aluminum or zinc die-cast components in environments subject to high thermal stress.
Thanks to the high-quality PIR raw material derived from industrial textile manufacturing, you can produce high-strength structural components with a product carbon footprint reduced by up to 90%—without compromising on material performance or batch consistency.
Properties Overview – Recycled PA66 GF50
(Trade name: ENTRON eco A GF50 NC)
- Charpy impact strength: 80kJ/m²
- Charpy impact strength: 16kJ/m²
- Modulus of elasticity in tension: 16,500 MPa
- Tensile strength: 230 MPa
- Elongation at break: 3 %
-
Melt temperature: 255°C — 265°C
- 50% glass fiber
- nature
- Drying: 80 °C; >4h
- Processing temperature: 270–300°C; <10 min
- Tool temperature: 70–90 °C
- Available as: impact-modified, UV-stabilized, heat-stabilized, injection moulding-optimized
- Packaging: silo, octabin, big bag, 25 kg bags
Frequently asked questions (FAQ)
It comes very close to matching the properties of virgin material and even surpasses the impact strength of many virgin materials. However, its advantage over virgin material is acarbon footprint(PCF) that is up to 90% lower.
What industrial quality standards and environmental declarations (ISO / EPD) does the compound meet?
- Environmental Management According to ISO 9001
- Environmental Management According to ISO 14001
- Energy Management According to ISO 50001
- Environmental Product Declaration (EPD) and Product Carbon Footprint (PCF): two methods for calculating product-specificCO2 emissions
- Acceptance test certificate for each delivery in accordance with EP APZ 3.1 per DIN EN 10204
Are you planning a project using our PA66 GF50? Request a sample for evaluation.
We are happy to provide you with standard sample material for comparison in your own testing lab or for initial test injection molding runs. Whether you need detailed material properties, want to initiate a sampling process, or would like to receive a specific quote for your series production—our materials experts are here to advise you as equals. Simply contact us by phone, email, or directly via the form.
